Phase encoding scheme handling¶
From version 3.0RC1 onwards, MRtrix3 is capable of importing information from
DICOM relating to the phase encoding of the acquired images, and encoding this
information within key-value fields inside an image header. This information can
then later be used by the
dwipreproc script, specifically using its
-rpe_header command-line option, to automatically set up and execute FSL’s
eddy commands without requiring explicit input from the user
regarding the phase encoding design of the imaging experiment. This page
explains how this information is encoded and manipulated by MRtrix3.
Due to variations in sequences, acquisition protocols, DICOM encoding, and image manipulation operations, MRtrix3 cannot be guaranteed to obtain or retain the phase encoding information correctly in all circumstances. Manual inspection of these data and/or the outcomes of image processing when making use of these data is advocated. If circumstances leading to incorrect import or encoding of this information in MRtrix3 is reproducible, please report this to the MRtrix3 developers so that the software can be updated to support such data.
Phase encoding information storage¶
The phase encoding information for a particular image file can be stored in one of two ways.
- The most convenient of these is storage of (one or more) key-value field(s) encapsulated within the image header, just as can be used for the diffusion gradient scheme. This ensures that the information is retained through image processing, as each MRtrix3 command passes the header entries of the input image through to the output image.
- Alternatively, this information can be stored within a JSON file that
accompanies the relevant image file(s). This information would then typically
be imported / exported using the
Precisely how this phase encoding information is encoded however depends on the nature of the phase encoding information for that image; specifically, whether the phase encoding information is identical for all volumes within an image file (or if it contains just one volume), or whether the phase encoding information varies between volumes within the image series.
Fixed phase encoding¶
In the case where both the phase encoding direction and the EPI total readout
time are equivalent for all volumes within an image, this information is encoded
within two fields: “
PhaseEncodingDirection” and “
fields are consistent with BIDS (the Brain Imaging Data Structure).
PhaseEncodingDirection can take one of six values: “
k-“. These correspond to the first, second and third axes of
the corresponding image. Exactly how these axes map to “real” / “scanner” space
axes (i.e. left-right, posterior-enterior, inferior-superior) depends on the
The image transfom that is stored in the respective image header, which may
potentially have been modified internally by MRtrix3 on image load (discussed
further in the Non-axial acquisitions section). Here, we begin with the most simple
Take an image that conforms to the RAS (Right-Anterior-Superior) convention common
to both NIfTI and MRtrix3. If the phase encoding is applied
(anterior-posterior), this is the second spatial axis, or axis “
the phase encoding is also reversed along that axis (“RAS” indicates that voxel
positions along the second axis increase when moving toward the anterior of the
brain, whereas “
A>>P” indicates the opposite). Hence, in this example,
PhaseEncodingDirection would have the value “
The phase encoding direction is defined specifically with respect to image axes. It is therefore not affected by the image strides, which only affect how the data for these axes are arranged when they are stored as a one-dimensional list of values within a file.
The phase encoding direction does not relate to “
z” axis directions in “real” / “scanner” space, as do other
representations of orientation information in MRtrix3. This is because phase
encoding specifically affects the appearance of the image along the image axis
in which phase encoding was applied. The mapping from image axes to real-space
axes is determined by the image header transform.
To demonstrate this: Imagine if an EPI image were to undergo a rigid-body
rotation. The EPI field inhomogeneity distortions would still align with the
relevant image axis after this rotation; but the effective
of phase encoding in real-space would change.
TotalReadoutTime provides the total time required for the EPI readout train.
Specifically, this is the time between the centre of the first echo, and the centre
of the last echo, in the train; this is consistent with BIDS, and is sometimes
referred to as the “FSL definition”, since it is consistent with relevant
calculations performed within FSL tools. It should be defined in seconds.
Variable phase encoding¶
If the phase encoding direction and/or the total readout time varies between
different volumes within a single image series, then the two key-value fields
described above are not sufficient to fully encode this information. In this
situation, MRtrix3 will instead use a key-value entry “
pe_scheme” (similar to
dw_scheme” entry used for the diffusion gradient scheme).
This information is stored as a table, where each row contains the phase encoding
direction and the readout time for the corresponding volume; the number of rows in
this table must therefore be equal to the number of volumes in the image. In each
row, the first three numbers encode the phase encoding direction, and the fourth
number is the total readout time. The direction is specified as a unit direction in
the image coordinate system; for instance, a phase encoding direction of A>>P would
be encoded as
[ 0 -1 0 ].
When images are acquired in such a manner that the axes do not approximately
correspond to RAS convention (i.e. first axis increases from left to right, second
axis increases from posterior to anterior, third axis increases from inferior to
superior), MRtrix3 will automatically alter the axis strides & transform
in order to make the image appear as close to an axial acquisition as possible.
This is briefly mentioned in the The image transfom section. The behaviour may
also be observed by running
mrinfo with and without the
which temporarily disables this behaviour.
Because phase encoding is defined with respect to the image axes, any transformation of image axes must correspondingly be applied to the phase encoding data. This is done automatically by MRtrix3 as the transformation occurs. Consequently, the phase encoding direction “reported” by MRtrix3 may in fact be different to that stored within the image header itself (or indeed within a sidecar JSON file); but it is vital that this information remain consistent with the image data, and MRtrix3 does its best to do so.
This process has consequences for the
dwipreproc script when manually
providing the phase encoding direction. The axis and sign of phase encoding
provided to the script must reflect the direction of phase encoding after
MRtrix3 has performed this transformation, i.e. as it is read by any
MRtrix3 command or as it appears in
mrview, not the actual encoding
of axes within the file.
When exporting a sidecar JSON file to accompany an output NIfTI image, the direction of phase encoding may also be transformed from that stored in the input image, in order to reflect any transformation that occurs when writing an output image specifically to the NIfTI format.
Manipulation of phase encoding data¶
The primary purpose of storing this phase encoding information is to automate the correction of EPI susceptibility distortions. However this can only occur if the information stored is not invalidated through the manipulation of the corresponding image data. Therefore, any MRtrix3 command that is capable of manipulating the image data in such a way as to invalidate the phase encoding information will automatically modify this phase encoding information appropriately. This includes modifying the representation of this information between the fixed and variable phase encoding cases.
Consider, for instance, a pair of b=0 images, where the first was acquired with
phase encoding direction
A>>P, and the second was acquired using phase encoding
$ mrinfo AP.mif ****************************** Image: AP.mif ****************************** ... PhaseEncodingDirection: j- TotalReadoutTime: 0.0575 ... $ mrinfo PA.mif ****************************** Image: PA.mif ****************************** ... PhaseEncodingDirection: j TotalReadoutTime: 0.0575 ...
Now watch what happens when we concatenate these two images together:
$ mrcat AP.mif PA.mif AP_PA_pair.mif -axis 3 mrcat: [100%] concatenating "AP.mif" mrcat: [100%] concatenating "PA.mif" # mrinfo AP_PA_pair.mif ****************************** Image: AP_PA_pair.mif ****************************** ... pe_scheme: 0,-1,0,0.0575 0,1,0,0.0575 ...
When the two input images are concatenated, MRtrix3 additionally concatenates the
phase encoding information of the input volumes; since it detects that these are not
consistent between volumes, it stores this information using the
entry, rather than
mrconvert command has a number of additional functionalities that can be used
to manipulate this information:
-export_pe_tableoptions can be used to import/export the phase encoding information from / to file as a table, i.e. in the format used for the
pe_schemeheader entry described above. Note that even if all volumes in the image have the same phase encoding direction and total readout time, these options will still import / export these data in table format.
-export_pe_eddyoptions can be used to import/export the phase encoding information in the format required by FSL’s
eddytool. The FSL documentation page describes this format in more detail.
-json_exportoptions can be used to import/export all header key-value entries from/to an external JSON file. This may be useful in particular for operating within the BIDS specification. There is a caveat here: If you use the
-json_exportoption on an image with fixed phase encoding, the
TotalReadoutTimefields will be written as expected by BIDS; however if the image contains variable phase encoding, then the
pe_schemeheader entry will be written to the JSON file, and this will not be appropriately interpreted by other BIDS tools.
-set_propertyoption may be useful to override these header entries if they are deemed incorrect by some other source of information.